中文 / RU
Kaiping city Xinxing casting technical development department
Crawler type shot blasting machine
Equipment features
1.After the shot blasting treatment of the machine by this machine, the workpiece can reduce the tensile stress. At the same time, the surface grain is refined, the surface of the workpiece is strengthened, and the service life is increased.
2.This shot blasting machine has low noise, low dust and high production efficiency. 
3. this machine lessens material consumption and lower the cost since the projectile can be automatically recycled.
4.This shot blasting machine is suitable for surface treatment of various parts. For example, adhering sand cleaning surface, black metal parts surface rust, the surface rust of the ferrous parts, blunt burr and burr edge on stamping surface, the surface treatment of forgings and workpieces after heat treatment as well as the removal of oxide on the surface of springs and the refinement of grains on the surface can be realized by the shot blasting process of this series of equipment.
 5.After the shot blasting, the workpiece can obtain a good material color. It can also become the front-end process of black coating, blue coating, and passivation of the metal parts. At the same time it provides a good base for electropating, painting and so on
 
Main parameter
Main technical parameters
Model QPL80 QPL100 QPL200
Crawler type shot blasting machine Rotate speed  3200r/min 3100r/min 2980r/min
Impeller diameter  280mm 360mm 420mm
Blasting quantity 70kg/min 100kg/min 190kg/min
Weight of the maximum piece  5kg 8kg 15kg
Weight of maximum loading 150kg 300kg 400kg
Crawler end dish diameter 400mm 600mm 600mm
Lifting amount of the hoister 4t/h 6t/h 9t/h
Wind amount of dust remoral  2000m3/h 2600m3/h 2800m3/h
Total power   7.6kw 11.2kw 14.7kw