Equipment featuresMain parameterMain technical parameters| Item | Name | Parameter |
| Stroke |
X-aixs moving stroke | 750/mm |
| Y-aixs moving stroke | 250/mm | |
| Principal aixs rising and falling stroke | 130/mm | |
| Feeding speed | Rapid moving speed(X/Y/aixs) | 25/25/m/min |
| Cutting speed | 1~15，000(XY) | |
| Worktable | Dimesion of worktable | 500*300/mm |
| Worktable load | 200/kg | |
| Number of T-slot | 3—14*75 | |
| From worktable to boom point of principle aixs | 550/mm | |
| Princple Aixs | Number of axes | 5～6/axis |
| Principle axis motor | 3HP—6P | |
| Principle axis rotate speed | 700—1200/rpm | |
| Principle axis taper hole | BT40 | |
| Distance between principle axes | 150/mm | |
| Outer diameter of principle axis | 130/mm | |
| Thread Taping | Max. machine screw | M42*1.25P |
| Max.Pipe screw | 1-1/2" | |
| Machine Size | Height of the machine | 2100/mm (not content light tower) |
| Machine size required are | 3.9/㎡ | |
| Total weight of the machine | 2900/kg | |
| Accuracy | Accuracy of positioning | 0.015/300/mm |
| Accuracy of repeated positioning | 0.01/mm | |
| Hydraulic Vice | Height of center | 250/mm |
| Double-opening stroke | 90/mm | |
| Double-opening distance | 150/mm | |
| Hydraulic System | Oil pump motor | (Horizontal straight cutting）2.2/kw-4 |
| Working pressure | 25～35kg/c㎡ | |
| Electric Source | capacity of electric source | 10/KW |
